Comparison of application results of two speckle methods for study multi-cycle fatigue of structural steel
Annotation
The new method of time-averaged speckle images and the well-known method of speckle-field interference studied the development of plastic deformations occurring during multicycle fatigue of structural steel. The correctness of strain determination by the new method is evaluated by comparing the data obtained by the two methods. Two optical systems including laser modules with different wavelengths were investigated. The proposed optical system allows to determine the components Δuy, Δuz of the relative displacement vector of two surface points located at a distance (measurement base) Δs = 66 μm. The known scheme makes it possible to describe deformations by the traditional method on the base of 470 μm. The object of study was a flat specimen made of 09Г2С steel with two side notches. Fatigue tests were carried out on a resonance-type machine at different cycle amplitudes. It is shown that at all cycle amplitudes the development of plastic deformations occurs by the mechanism of cyclic creep. There is a good correlation between the data obtained by two different speckle methods. At the same time, the strain estimated by the new method is in some cases an order of magnitude higher than the strain calculated by the known method. Obviously, this is due to the existence of local small- sized (of the order of 101 µm) strain areas which cannot be measured by conventional methods. The ultimate tensile strain Δuy/Δs calculated by the new method is of the order of 10–1, which coincides with the similar strain occurring in tensile testing of standard specimens. The results obtained by the new method justify the need of developing sensors and nondestructive testing devices of a new generation, allowing to estimate the time to fatigue crack initiation by the rate of change of physical quantities and by their limit values.
Keywords
Постоянный URL
Articles in current issue
- Structural and spectral properties of YAG:Nd, YAG:Ce and YAG:Yb nanocrystalline powders synthesized via modified Pechini method
- Computational prediction in the problem of stereo image identification
- Laser-induced thermal effect on the electrical characteristics of photosensitive PbSe films
- Homograph recognition algorithm based on Euclidean metric
- An improved performance of RetinaNet model for hand-gun detection in custom dataset and real time surveillance video
- Solving the problem of preliminary partitioning of heterogeneous data into classes in conditions of limited volume
- Correction of single error bursts beyond the code correction capability using information sets
- A novel strategic trajectory-based protocol for enhancing efficiency in wireless sensor networks
- Automation of complex text CAPTCHA recognition using conditional generative adversarial networks
- Deep attention based Proto-oncogene prediction and Oncogene transition possibility detection using moments and position based amino acid features
- A method of storing vector data in compressed form using clustering
- Monocular depth estimation for 2D mapping of simulated environments
- Segmentation of muscle tissue in computed tomography images at the level of the L3 vertebra
- Providing operating modes for Coriolis vibration gyroscopes with low-Q resonators
- Collection and processing of environmental information in oil and gas production areas and solving other applied problems using active search methods (Review article)
- Using machine learning technologies to solve the problem of classifying infrasound background monitoring signals
- Study of the influence of the optical fiber output end shape on hydroacoustic processes in a liquid stimulated by microsecond pulses of Yb,Er:Glass laser radiation